News

What are the strict requirements when using a circle making machine

Posted by: zida    Posted by: zida2021-04-07

打圈机运作


Basically, the operators of every machinery need to undergo professional training before they can operate. This is a guarantee for the safety of our machinery and operators, as well as a guarantee of the quality of our products. Of course, we not only have requirements for these, but also have very strict operating rules and precautions when operating. Today, the editor will take you to understand together!


1. Strictly abide by regulations and safety operating procedures;


2. Operators should understand and master the structure and working principle of the equipment, as well as maintenance and inspection points;


3. The equipment must be installed on a hard foundation surface, aligned with the feed rail surface in a horizontal position;


4. If reverse rotation is required while the equipment is running, the speed control switch should be reset first, and the machine should be shut down for 1 minute before starting up;


5. When feeding the dynamic pressure wheel, the fastening bolts should be loosened first. After the feed reaches the scale, the bolts on both sides of the passive wheel should be fixed;


6. During use, the impurities inside the groove of the pressure roller and on the surface of the workbench should be cleaned in a timely manner.




Foshan Zida Electromechanical Equipment Co., Ltd
Monday-Sunday00:00-23:59
Copyright © Foshan City, Zida Electromechanical Equipment Co., Ltd    粤ICP备2020134621号Technical Support:ceall.net.cn 
Enquiry Hotline
186-7513-3356

Sweep WeChat Consultation

top