Under normal circumstances, when using a straightening machine at work, there is a dedicated person to take care of it. If there are a lot of steel bars that need to be straightened, specialized personnel are needed to arrange the work. When the straightening machine is working, personnel need to continuously place the round steel bars into the straightening machine, mainly through the hole on the right side of the machine. This way, the bent steel bars can be directly straightened. After straightening, the steel bars are placed on the operating table of the bending machine because they need to be processed into hoop bars, which is to wait for the crane to come and transport these processed hoop bars to the construction site. In fact, the steel bars are molded and transported to the construction site. The entire workflow of straightening is a very extensive task, and according to the usage requirements of steel reinforcement, Under normal circumstances, one strip needs to be straightened and machined into thousands of finished products.
So in this high load processing situation, the entire operation of the straightening machine will definitely experience serious overload, but under normal circumstances, there will be no overload phenomenon. If the action volume is continuously running for 24 hours, the straightening machine will definitely not be able to withstand it. Therefore, in daily operation, operators must arrange the shutdown and maintenance of the straightening machine reasonably, otherwise the consequences will be more serious when the straightening machine malfunctions.